Buy Low Price From Here Now
Ultra-Flexible Dual-Mode Foot Pedal for Volume and Modulation Control
Readmore
Technical Details
- Volume control of one stereo or two individual musical instruments- Dedicated modulation function for direct connection to keyboards modulation control input
- VCA control for utmost reliability and smooth audio performance
- Adjustable minimal volume
- Standard 9 V battery or 12 V DC adapter operation (not included)
See more technical details
By Brock Martin
I got this pedal recently. All in all, it's a pretty nice device, expecially for the price. Seems solid and well-made. It has a nice big pedal for big feet. It works smoothly. I have found no drawbacks to the operation or quality of this pedal. My only gripe, is that the power for the pedal is either by an internal 9V battery, or a 12V plug in power supply. Why the difference? The really bad part (for me) is that I bought this to install in a newly-purchased Behringer pedal board, which comes with a 9V power supply. So, in order for me to use this pedal in the board, I will have to run two different power supplies, or run the pedal on battery and everything else off of the pedalboard's power supply. [Behringer...this was not thought out very well.] I'm now in the process of making myself an voltage adapter, but finding all the right parts has proven so far to be a hassle. Bottom line: the pedal itself is great, but the power supply thing could be a frustration to you.
One final note about Behringer...they seem to get bad marks now and then. I really don't understand why. I have two Behringer amps, two of their stomp boxes, the above-mentioned pedal board, and the volume pedal just discussed. I really like all of them. I have never had any problem with any of these items. They perform well, are well made, and certainly, all came at a reasonable price. Behringer's full range of products is so extensive, that I see little reason to buy any other brand. I'm sticking with them.
By S. Dragseth (Seattle WA United States)
i have a Hog guitar syn that came with an m-audio exp pedal.M-Audio EX-P Expression Pedal(they should be ashamed of themselves) It broke like everybody elses. It worked pretty good but when u take it apart and look at the plastice piece that breaks, u wont buy another one either. So i bought this one. I had to make a cable and reverse the wires, i used stereo headphone jacks and and headphone cable cut into and and reversed the wires. If i had been smarter i could have used the wire from the m-audio pedad with mini headhpne jacks i/8 inch pluch the regular ones 1/4 with i/8 adapter but i was so upset i threw the whole thing out without thinking! I actually prefer the throw or the distance on the old pedal but i guess u cant have every thing. its very smooth. Ive tried it as a volume control also , seems to work but i dont use it for that. Most behringer stuff u will luv it or send it back right away from what ive heard. im an amateur, i have some mikes, a midi foot controller fcb1010 , a condenser preamp, i havent sent anything back yet. Their equimpent is a little Spartan sometimes but if u know what your getting usually u wont be disapointed at the price of their stuff to the competiton.
By Mr. Amazed (Mexicali, Baja California Mexico)
I have always wanted a volume pedal but thougt they were too expensive. I recently started playing electric guitar again, so I unpacked my effects (a digitech RP50). I needed a passive volume pedal to exploit the digitech's whammy, octave and wah effects but since my plaing needs don't require to spend 80 to a 100 bucks on an on-the-go rig, I opted for this unit. I am very comfortable with this pedal, it has the same size as my old Dunlop Crybaby wah and I can use it in many ways! I can plug it into my keyboard and use it as a modulator or volume pedal, thus having more control of it when I play or compose.
It is very rugged, made of plastic and rubber but I still have to use it some more to see how it withstands the test of time.
To install a nine-volt battery you have to dissasemble the bottom of the pedal by unscrewing a single screw, which goes through a small metal piece. (Note the way this piece is assembled though, or you'll have to figure out how it all goes togheter again). I was very pleased with its performance as soon as I figured out how to hook it up to my effects processor(RP50) but still, I have to test it in recording.
By Rojago (USA)
For the price, this pedal is extremely hard to beat. Works really well for controlling the Rocktron gear in my guitar rig. One caution, my use for this is just as a CV controller... none of my guitar signal goes through the pedal. I've heard complaints elsewhere that this pedal can suck tone in a big way, so if you are planning on using it as an in-line device between your guitar and an amp do your homework before buying. For my app, (sending a voltage signal to the Voodu Valve), this works great. It doesn't require a battery to run as a CV controller, and it has a lot more metal on it than I expected for the price, reasonably weighty and stays put while you're using it. Pedal feel is just fine for volume swells or working the sweep of the wah. Treadle stays put, so if you are going for the half-cocked wah sound, this'll do it just fine. Highly recommended for this particular application.
Images Product
Buy Behringer FCV100 Ultra-Flexible Dual-Mode Foot Pedal Now
No comments:
Post a Comment