Batt-O-Meter Guitar Pedal and Preamp Battery Tester

Buy Cheap Batt-O-Meter Guitar Pedal and Preamp Battery Tester

Buy Low Price From Here Now
The Batt-O-Meter from Keith McMillen Instruments is the first battery tester for musicians. Test the remaining hours of battery life and voltage of 9 volt batteries while they are still inside gear through a 1/4-inch plug. The Batt-O-Meter works with almost any active instrument pickup or effects unit (stompboxes and other floor effects) that requires a 9 volt battery to operate, and is turned on when a standard 1/4-inch cable is plugged into it. The Batt-O-Meter works by automatically placing the battery under an appropriate load to simulate real world usage. A micro-processor within the unit allows the device to intelligently determine the different loads that can be put on the battery and calculate the power in hours remaining. This eliminates the need for extra buttons and adaptors, and makes the Batt-O-Meter simple to use. The Batt-O-Meter can test stand-alone batteries: 9V, 1.5V (AAA, AA), and 3V. It works with Alkaline, Rechargable, and old school Carbon-Zinc batteries. The Batt-O-Meter requires its own 9 volt for operation, which it can self-test. Located in Berkeley, California, Keith McMillen Instruments (KMI) is an intimate company that makes innovative technology for string instruments. A portion of each KMI sale is donated to the BEAM Foundation for research and provide commissions for new musical works. Visit www.Batt-O-Meter.com for more product information, including videos, documentation and support.
Readmore

Technical Details

- designed to quickly save performers time and stress before relying on a battery on stage or in studio
- reads how many volts a battery is delivering
- reads hours left before the device runs out of power
- checks the remaining life in any 1.5-volt or 9-volt battery
- convenient slide switch differentiates between Alkaline, Rechargeable, and Carbon Zinc batteries
See more technical details

Images Product

Buy Batt-O-Meter Guitar Pedal and Preamp Battery Tester Now

read more “Batt-O-Meter Guitar Pedal and Preamp Battery Tester”

ART Tube MP Microphone Preamp

Buy Cheap ART Tube MP Microphone Preamp

Buy Low Price From Here Now
For microphones, acoustic guitar, warming up a direct input to a mixer from a bass guitar, keyboard, etc., there is no sweeter sound than a tube preamp. In response to increasing demand for affordable tube mic preamplification, ART offers the Tube MP with the features that make it as powerful as units that cost 5 to 10 times more. Features include a 12AX7 tube, +48v phantom power, a phase reversal switch, 1/4' & XLR input/output, input control with two ranges of gain (+26dB to +60dB and +6dB to +40dB), and a +20dB gain boost for mics (or use it as a pad for line level signals). A peak LED allows you to precisely monitor clipping and an output control is included for trimming back to unity gain.The ART Tube MP is the world's most popular external tube microphone preamp. Whether you're working with a four-track, hard-disk, or digital multitrack recorder, the Tube MP's TEC award nominated design will allow you to obtain professional recording studio results at a fraction of the cost of comparable equipment. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low-noise and high quality. While its primary application is to be used with a microphone, the Tube MP is an exceptional direct box - impedance matching, amplifying and improving the sound of any instrument plugged into it.The usage of external mic/ line preamps has become increasingly popular over the past several years. The Tube MP offers superior performance and sound quality to the on-board preamps found in today's low-cost mixers and multi-trackers. It's sound has been consistently favored over other products costing upwards to ten-times its price. Professional quality sound combined with professional features like: a 12AX7a Tube, phantom power and Phase Reverse, are what have made the Tube MP a staple in thousands of studios worldwide. For a minimal investment, a Tube MP can provide the single largest improvement to the sound of your stu
Readmore

Technical Details

- Hand Selected 12AX7a Tubes
- Variable Input and Output Gain Controls
- Excellent as a Tube DI
- XLR and 1/4" Inputs and Outputs +48 volts
- Phantom Power
See more technical details

Images Product

Buy ART Tube MP Microphone Preamp Now

read more “ART Tube MP Microphone Preamp”

Xotic BB Preamp Distortion Sustain Pedal

Buy Cheap Xotic BB Preamp Distortion Sustain Pedal

Buy Low Price From Here Now
The Xotic BB Preamp Effect Pedal offers a wide variety of sounds. It's capable of a 30dB+ clean boost with an adjustable ±15dB two band active EQ which adds a wide range of harmonic content to your ideal sound.
The BB also utilizes a pre-gain stage which allows the Pedal to go from a very pristine clean to a very smooth, compressed, overdrive sound.
True bypass for eliminating any signal interference when switched off.
Can be used with AC adapter (optional) or 9V Battery.
Readmore

Technical Details

- True Bypass
- Two Band Active EQ
- 9V Battery or DC adapter (not included)
See more technical details

 "The Best 2nd preamp!" 2010-02-06
By Walter R. Bryant
This pedal is not like an addition to your amp or preamp, it's more like an extension. No added color, just more sound. It's like your knobs go in range to 20 instead of 10! Solidly built and easy to use. Your ear dictates the settings. It's well worth the cost!

 "BB Preamp" 2009-11-09
By Gene P. Mccahill (Md)
My secret to tone others wonder about. Run it through a Dr Z Maz and get a tone gusher. I had second thoughts about sharing secrets. Well, it's no longer a secret.

 "One of the best overdrive pedals" 2008-12-14
By William Bent (NJ USA)
I use this with a Strat and a Suhr Badger 18Watt combo, and it sounds really good. It maintains your playing dynamics, and doesn't muddy the sound like most other overdrive pedals.

It's true bypass meaning it will not affect your signal at all when bypassed, which is nice if you have a quality guitar and amp, but I don't even care cause I leave it on most of the time!

It accepts a standard Boss AC adapter and has a battery compartment.

This is probably not what you're looking for if you are a metal player, but if you play blues/rock, do yourself a favor and check this pedal out!


Images Product

Buy Xotic BB Preamp Distortion Sustain Pedal Now

read more “Xotic BB Preamp Distortion Sustain Pedal”

ART DJ Pre II Phono Preamp

Buy Cheap ART DJ Pre II Phono Preamp

Buy Low Price From Here Now
The ART DJ Pre II should be in every DJ's gig box!Vinyl records have drawbacks. Bass compensation can be needed during playback. Records produce a certain amount of hiss, and magnetic cartridges produce a weak signal. A separate RIAA preamp is necessary when you are connecting a turntable to a mixer that does not have one built in. The ART DJ Pre II features an RIAA-type phono preamp circuit with full patching facilities for connecting a phono turntable and mixer.The DJ PRE II (formerly named thePhono MicroPRE) acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamps gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card.Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.ART DJ Pre II FeaturesDual RCA-type inputsDual RCA-type outputsGround terminalPower: 12V DC (Adapter included)ARTcessories Series OverviewCreative audio solutions in cool little boxes.ARTcessoriesare taking the audio world by storm and quickly becoming a popular brand with musicians, DJs and studio engineers everywhere around the World. Split, combine, mix, power... you name it. On stage, in the studio, in your liv
Readmore

Technical Details

- Dual RCA-type inputs
- Dual RCA-type outputs
- Ground terminal
- Power: 12V DC (Adapter included)
- Dimensions: 1.75 H x 4.2 W x 3.5 inches D (44.5 x 107 x 89mm)
See more technical details

 "great sounding phono preamp" 2010-04-01
By ronald Jee (aurora, or)
without this preamp, i could barely hear the music from playing a vinyl record thru my pioneer 919AH-k AV receiver, and the sound was weak and flat no matter how high of volume i used. with the DJ Pre II preamp, the record now plays with excellent loudness and hi-fidelity. the adjustable gain knob gives the ability to match the preamp output with the sensitively of the receiver. the instructions with the unit are very minimal. the are two lighted buttons: low cutoff filter, and capacitance adjustment, but there is no directions on how to determine the best setting, and i can't tell the difference whether the buttons are on or off. the unit is attractive and appears well made.

 "Does the job" 2010-02-10
By anonymous (PA United States)
Unpackage it, plug it in, spend 2 minutes adjusting and away you go. It does the job!

 "Decent Pre-amp for the Money" 2010-01-05
By S. taylor (chicago, il United States)
If you're looking for a good phono pre-amp under $100 then this is worth looking at. The sound decent to good (not terrific to incredible) and if you have a lower gain output cartridge (moving coils instead of moving magnets) then there's a good amount of gain to give you more output. Though if you have a moving coil cartridge you're probably not looking at a preamp this cheap. On the downside, there is a power light on the face of the unit that is on as long as the unit is plugged in and it's pretty bright. There's no power switch to turn the unit off, so it's constantly consuming power unless you unplug it. Which I would think would be bad for the longevity of the unit. Also, to make it smaller they've put the DC power converter on the power plug of the unit which means it's got a pretty big wall wart. Overall I feel good about the purchase and I the sound is respectable for the price. I just wish it had a power button and I don't understand the need for a power light if the unit is always on when plugged in.

 "Great Sound, Low Price" 2009-12-04
By Peter Martin (Valparaiso, Indiana)
About a year ago, I got a great deal on a 7 speaker surround sound system that was a vast improvement over my old (as in 20 years old) two-speaker stereo. The only catch was that the system did not come with a phono input and I still have over 100 LPs from the days of my youth. This fall, I decided it was time to start listening to records again, so I started shopping around on-line. I stumbled upon the ART DJ Pre II Phono Preamp and its more sophisticated sibling, the ART V2 USB Phono Plus DJ Preamp. I opted for the lower tech version (without USB, optical, and other output options) because my computer's sound card has RCA inputs and because I primarily just want to listen, not convert my old LPs and because I liked the $44. price tag on the Pre II. It took less than 10 minutes to have it on-line and playing an old favorite. It has a simple interface of an output knob, two in-out buttons for the input limiter and the low-end cut (to reduce rumble) and a VERY bright blue power light. I chose an 1960s release of Debussy favorites that had seen a LOT of play in my childhood on less than audiophile quality turntables. I was impressed at how little noise came through the system and was very pleased with the over-all results. Although I am a musician and love music of all kinds, I need to tell you that my ears often are unoffended by little things that my more discerning friends find fault with. I want to hear the music with as little background noise (hiss, pop, or rumble) as possible and the ART DJ Pre II does that for me. I did not need to the input cap or low cut filters that toggle on an off on the front of the unit, it just sounds great on my system. There are just two things I would like to change about it. I am a very power-conscious person and there is no on/off switch on the unit. Furthermore, it is a DC powered unit with an inverter brick that also stays warm whether the unit is in use or not. Eventually, I will rearrange my power strip for my entire system so that I can kill the power when I am not using it, but it annoys me that the unit can't be a little "greener". and speaking of colors, the ultra-blue LED power light actually hurts my eyes to look at it. I will probably solve this problem with a piece of electrical tape. A quarter the brightness would give me the information that I need: that is whether or mot the unit has power. Still, I am pleased with the unit and give it a qualified thumbs-up.

 "Awesome product" 2009-11-20
By A. for YOU
I purchased this preamp so I could enjoy using my turntable once again. I had recently gotten the turntable out and plugged it up to my wife's stereo, which has no phono inputs. I was disapointed to find that the volume level was virtually nonexistent, so I bought the preamp, actually, as a result of all the positive reviews on Amazon. I finally used it for the first time today, not with the stereo, but in conjunction with a CD burner tht I have. I tried to hook the turntable up to my laptop and use the Audacity software, but I wasn't able to get that to work (I think because I was plugged into the mic jack- my laptop does not have a line in). At any rate, I was able to create a .wav file and it sounded terrible. So, I got out my old Pioneer CDR burner that is a stereo component, and I plugged the turntable to the preamp and right into the Pioneer. I was quickly able to do an input check and monitor the recording level, and within minutes, I was recording my vinyl onto a CDR. I later imported the CDR to my computer using Rhapsody and I have to say, it sounds like I am listening to vinyl right out of my computer. I am very satisfied with the DJ preamp. It is easy to use, and I have had no noise introduced that some others have complained about, so I have not had to use the ground at all. I'm looking forward to plugging this up to my stereo and just listening to all my old albums. You can't beat the price, either. Nice product!


Images Product

Buy ART DJ Pre II Phono Preamp Now

read more “ART DJ Pre II Phono Preamp”

M-Audio MobilePre USB Mobile Preamp and Audio Interface

Buy Cheap M-Audio MobilePre USB Mobile Preamp and Audio Interface

Buy Low Price From Here Now
MobilePre USB is the preamp with a built-in audio interface that�s designed for laptop recording such as field recording and sampling expeditions. In fact, it�s one of the only completely bus-powered preamps available. (Of course, you can use it on the desktop as well.) A total of three kinds of audio inputs and outputs provide maximum flexibility for any application�including two on-board microphone/instrument preamps and high-impedance instrument inputs ideal for connecting guitars and basses. And unlike many competitors, zero-latency direct monitoring provides you with a streamlined professional recording experience.
Readmore

Technical Details

- 2 x 2 16-bit/48kHz analog I/O w/ preamps
- 2 microphone inputs (XLR balanced) with 48v phantom power
- 2 high-impedance instrument/line inputs (balanced/unbalanced 1/4" TRS)
- Zero-latency hardware direct monitoring (mono/stereo) with software level control
- USB-powered for total mobility
See more technical details

 "A bit dated, but totally solid." 2010-01-16
By Mike Blair
The MobilePre has been around for a while now - note that the photo shown here is outdated, the unit is now black and grey rather than blue/white. While this unit may not be the absolute latest and greatest audio interface on the market it has pretty solid support and history. I got mine about 8 months ago for ~$60 (i think there might have been a pricing mistake!).



Works well with Windows 7 32 and 64 bit OS. My only minor gripe is that the minimum number of samples is 128, which makes for roughly a 7 ms total latency. The built-in soundcard on my HP laptop works down to 64 samples (32 using Jack in Linux), BUT cannot touch the sound of the MobilePre. Note - using Reaper permits using a WDM Kernel Streaming driver instead of ASIO, which allows a little better latency. Still, sound travels roughly 1 foot each millisecond, so the total latency is like have an amp about 7 feet away, which is barely noticable.



Solidly built, great for guitar. The preamp section when using a dynamic mic is a bit noisy though.



Would recommend to a friend.

 "I have enjoyed this for years." 2010-01-12
By T. L. Warnick (Utah)
I have used one of these for a couple of years. Paired with a matched set of R0DE NT-2s, and using goldwave recording software it is awesome. I have made hundreds of recordings of everything from crickets, voice reading, live bands, and who knows what else. It is absolutely perfect for recording band practice and gigs, and cheap-o demos.



I think this is the best $100 you can spend for remote recording (and good microphones.)



I'm wondering now if I can get another one and record four tracks (surround) simultaneously.

 "Absolutely Love It!!!" 2009-12-03
By DCH
This is probably one of the best pieces of studio equipment anybody can have, especially if you are seeking mobility with your equipment. I have used this for both music and podcast production and it is solid. It is light and compact. I was able to fit this piece of equipment along with a mic, the cord and my 13" macbook pro in a standard size laptop backpack. Not heavy or bulky at all. Works great in any production situation. Looking for production on the go, this is your best bet. Also Amazon saves you about $50 versus going to Guitar Center.

 "No supported by Windows XP Media Center" 2009-11-04
By J. CONTRERAS
No supported by Windows XP Media Center. I finally found this on the manufacturer web page. Could be nice if the warning is on Amazon so, you don't waste time ordering and returning

 "Excellent product; Vista users, beware..." 2009-01-29
By C.W.
Update: Beta drivers are out now on this product for Vista 64 bit, and they work pretty well.





I would have given this product 5 stars, but since switching to a new computer running Vista 64 bit, I have had some problems.



This is an extremely competent interface, and will do exactly what you need it to do. I have had it for over 3 years, and it has worked flawlessly throughout. It's very simple: install your drivers, plug it in via USB, and you are ready to go. I used it as my mic input, and just as a regular sound card. Because it supports ASIO, I never had a single latency issue with this device, and I run a lot of taxing programs (FL Studio, SONAR, and Reason). It's very solid and durable as well, almost feels unbreakable at times. I dropped it from over 10 feet, and it still worked perfect.



Now, if you are on Vista 64 bit, and considering this product, please wait. There are no current drivers available. M-Audio will tell you that it's class compliant, and will work, which is only half true. It will work, but you will have to download a third party program that offers ASIO support, and maybe jump through a few other hoops to get it to work DECENTLY, and not have horrible latency problems. Just keep that in mind.


Images Product

Buy M-Audio MobilePre USB Mobile Preamp and Audio Interface Now

read more “M-Audio MobilePre USB Mobile Preamp and Audio Interface”